Skip to content

Electricians for Bristol homes and businesses

Electrical installations in Bristol

New circuits, consumer units, sockets and lighting, fitted properly and tested before we leave. Bolt Electrical work in everything from tall Victorian terraces to new-build flats, and we plan the job around the building you actually have.

  • Homes, landlords and small businesses
  • Every new circuit tested and certified
Bolt Electrical electrician carrying out an installation
Signed off before we pack upYou get the paperwork for the work we do.

What Bristol's housing means for your installation

Bristol's homes were built across very different decades, and the age of the building decides how the work is done. Here is what we usually find and how we deal with it.

Victorian and Edwardian terraces

Old wiring, tall narrow houses

Think Bishopston, Southville, Redland and Cotham. Original rubber or cloth-covered cable, a handful of sockets per floor and no RCD protection are common.

How we handle it: we lift floorboards and use existing cable routes where we safely can, so there is less chasing into lath-and-plaster and solid brick.

1930s semis and post-war houses

Wiring that has been added to over the years

Henleaze, Horfield, Fishponds and Knowle have plenty of houses with old fuse boxes, extra sockets bolted on by previous owners and nothing spare for a new kitchen or loft room.

How we handle it: we check what is already there, then add new circuits and a modern consumer unit rather than overloading the old ones.

Flats and conversions

Limited routes, shared supplies

Converted houses and apartment blocks in Clifton, Redcliffe and the city centre often have meter cupboards shared with neighbours and concrete floors where cables cannot be hidden.

How we handle it: we agree access with the building manager or freeholder first, then use trunking or conduit where neat concealed routes are not possible.

Extensions, garages and small units

New load on an existing supply

A kitchen extension, converted loft, garden room or shop fit-out adds ovens, heating and lighting that the original board was never sized for.

How we handle it: we work out the load first, then size cables and protection to suit, with separate circuits where they are needed.

What a Bristol installation job includes

Whether it is one new circuit or a full rewire, the same standard applies from first measure to final test.

  • New circuits for kitchens, extensions, lofts and garages
  • Consumer unit replacement with RCD protection
  • Extra sockets, USB outlets and fused spurs
  • Downlights, pendants, dimmers and feature lighting
  • Cooker, hob, shower and appliance supplies
  • Partial and full rewires
  • Smoke and heat alarm wiring
  • Testing, certificates and a tidy finish

How we carry out the work

Most of the disruption in an installation comes from poor planning. We map the job before any cable goes in, so you know which rooms and which circuits will be affected.

Electrician working on wiring during an installation
  1. 01

    Survey and plan

    We inspect the existing wiring and board, check wall and floor construction, and agree where sockets, lights and cable routes go.

  2. 02

    First fix

    Cables, back boxes and containment go in before any decorating. We protect floors and furniture and keep dust to a minimum.

  3. 03

    Second fix

    Sockets, switches, lighting and the new consumer unit are fitted and connected. Power is off only while we need it to be.

  4. 04

    Test, certify, explain

    Every circuit is tested, the certificate is issued and we show you what is labelled where before we clear up and leave.

What affects the cost of an installation in Bristol

No two houses are the same, so we price after seeing the property and the job. These are the things that move the figure up or down.

Ask for a quote
  • Age and condition of the wiring

    Older houses may need earthing and bonding brought up to current standards before new work can be connected.

  • Walls and floors

    Solid brick, lath and plaster and concrete floors in flats all take longer than timber floors and stud walls.

  • Number of circuits and points

    More sockets, lights and dedicated supplies mean more cable, more testing and a larger consumer unit.

  • Access and parking

    Much of Bristol is residents-only parking with narrow terraced streets. Tell us early and we will plan how to get tools and materials to the door.

  • Making good

    Chasing walls and lifting floors leaves repairs. We will tell you up front what is included and what a decorator will need to finish.

Regulations we work to

Electrical installations in homes are controlled work. Here is what that means for you.

BS 7671

The wiring regulations

All design, cable sizing, protection and testing follows the current edition of BS 7671, the UK standard for electrical installations.

Building Regulations Part P

Notifiable work

New circuits and consumer unit changes in homes must comply with Part P. As a NICEIC registered firm, the work is notified for you and you receive the certificate.

Certification

Paperwork you can keep

Landlords, mortgage lenders and insurers can ask for proof. We issue the certificate for the work we carry out, so you have it when it is needed.

Districts we cover around Bristol

We take installation jobs across the city and the surrounding suburbs, including:

  • Clifton
  • Redland
  • Cotham
  • Bishopston
  • Southville
  • Bedminster
  • Horfield
  • Henleaze
  • Fishponds
  • Knowle
  • Brislington
  • Filton

Other electrical work in Bristol

Questions Bristol customers ask before an installation

Does my Victorian or Edwardian house in Bristol need a full rewire?

Not always. It depends on the condition of the cables, earthing and consumer unit. Rubber or cloth-covered cable, cracked insulation, round-pin sockets and a rewireable fuse box are warning signs. Bolt Electrical can inspect and test first, then tell you whether a full rewire or a staged upgrade makes sense.

I have no driveway. Can you still do the work?

Yes. Plenty of Bristol streets are residents-only parking, so we plan for it. Tell us at the quote stage where we can park or load, and we will arrange how to bring tools and materials in so the job does not stall.

Will the power be off during an installation?

For new sockets and lighting, only briefly while we connect to the board. A consumer unit change means the power is off for part of the day. We tell you when beforehand so you can plan around fridges, computers and broadband.

Do I need a certificate for new electrical work?

Yes. Notifiable work in a home, such as new circuits or a new consumer unit, must comply with Part P of the Building Regulations. We issue the electrical certificate for the work we carry out, which you will need when selling, letting or dealing with an insurer.

Can you install in a flat or converted house?

Yes. We will check access to the meter and communal areas first and agree any permissions with the landlord or building manager. Where concealed routes are not possible, we use neat trunking or conduit rather than leave cables exposed.

How do you work out the price for an installation in Bristol?

We look at the age and condition of the existing wiring, the walls and floors we need to work through, how many circuits and points you want, and access to the property. We then give you a price for the job rather than guessing over the phone.

Planning electrical work in Bristol?

Talk to an electrician about what you need and get a straight answer.

07123456789