Skip to content

Electricians for Bristol homes and businesses

Finding faults in Bristol

Tripped circuits, dead sockets, lights that flicker, or a burning smell from the board. Bolt Electrical diagnose electrical faults quickly and fix them safely. Same-day callouts mean you are not left without power or worrying about what might fail next.

  • Same-day callouts available
  • Fault found and fixed in one visit
Bolt Electrical electrician testing a circuit breaker
Fault diagnosed and explainedWe tell you what is wrong and what needs to happen next.

Common electrical faults in Bristol homes

Bristol's mix of old and newer housing brings different electrical problems. Knowing what to look for helps you spot when to call an electrician.

Tripped RCD or circuit breaker

The most common call we get

The board trips as soon as you plug something in, or only on certain circuits. In older terraces it may trip randomly with no clear cause.

What it usually means: a faulty appliance, a wet environment, old cable insulation, or corrosion on connections inside the board itself.

Dead sockets and switches

One room or one circuit affected

A socket does not work but others do, or the lights in the kitchen have failed while the bedroom is fine.

What it usually means: a tripped fuse or breaker for that circuit alone, a loose connection at the board, a broken socket, or a fault in the cable.

Flickering or dim lighting

Often a sign of loose connections

Lights dim when other appliances come on, or one light flickers while others are steady. Victorian properties with old wiring report this frequently.

What it usually means: poor earthing, a loose connection at the light fitting or the board, corrosion in the cable, or the supply wire itself needs attention.

Burning smell or scorch marks

Stop using it immediately

A smell from a socket, switch or the consumer unit, or dark marks around any electrical fitting.

What it usually means: arcing, overheating cable or a fault inside the board. This is a fire risk and needs urgent attention.

Intermittent power loss

The power cuts out and comes back

Happens sporadically, sometimes only in damp weather or when it is cold. Flats and conversions often have this issue.

What it usually means: moisture getting into connections, a corroded component in the board, or an intermittent fault in the cable.

New appliances trip the board

Everything was fine until you plugged it in

A new oven, shower, heat pump or large appliance causes immediate trips or blows fuses. The old fuse box or board cannot handle the load.

What it usually means: the appliance is legitimate but the supply or protection is too small. The board may need upgrading or the appliance its own dedicated circuit.

How we find and fix electrical faults

Some faults are obvious; others take systematic testing to track down. We use proper equipment and do not guess.

  • Test the appliance or area where the fault happens
  • Inspect connections at the board, sockets and fittings
  • Use test equipment to find faults in the cable or wiring
  • Test the earth and bonding to rule out safety risks
  • Fix the fault — replace a socket, reseat a connection, replace a breaker or repair the cable
  • Test again to confirm the fault is gone and nothing else has been affected

What happens when we come out for a fault

We aim to find and fix most faults in a single visit. If the problem is intermittent or the cable is buried in solid walls, we may need longer or a second appointment.

Electrician diagnosing an electrical problem
  1. 01

    Listen and ask questions

    You tell us what the fault is, when it started and what makes it worse or better. We ask about any recent changes or new appliances.

  2. 02

    Test and inspect

    We check the board, test circuits, inspect sockets and switches, and use a tester to find the fault. This usually takes 30 minutes to an hour.

  3. 03

    Explain what we have found

    We tell you what is wrong, whether it is safe to use and what fixing it will involve. No surprises later.

  4. 04

    Fix it

    If you want to go ahead, we carry out the repair — replace a socket, retighten a connection, replace a breaker or repair the cable.

  5. 05

    Test and confirm

    We test the fix works and that the fault has not masked another problem. Everything is safe before we leave.

What affects the cost of finding a fault in Bristol

Some faults cost £50 to fix; others take longer. These are the things that change how much time we spend and what we charge.

Ask for a quote
  • How obvious the fault is

    If the board is tripping or a socket is dead, we can narrow it down quickly. An intermittent fault or one hidden in the cable takes longer to find.

  • Age and layout of the wiring

    Older houses with cable buried in solid brick or plaster take longer to test than modern timber-frame properties with accessible routes.

  • What needs to be fixed

    Replacing a socket takes 15 minutes. Repairing buried cable in walls or replacing a breaker in the board takes longer and may need making good.

  • Parking and access

    Narrow terraced streets in Southville or Bishopston may add time if we need to find a bay and carry tools in from a distance.

  • Time of day or week

    An emergency call outside normal hours or at the weekend may carry a premium, but we do take callouts 24/7.

When to call immediately

Some electrical problems are urgent. If you see or smell any of these, stop using the circuit and call us.

Burning smell

Smoke or scorch marks

From a socket, switch, light fitting or the board itself. This is a fire risk. Turn off the circuit at the board and do not use that area until we have checked it.

Continual tripping

Board trips as soon as you reset it

Or trips every time you plug anything in. The fault is live and dangerous. Call us for same-day help.

Wet or damp areas

Water near electrics

A flooded basement, condensation in the meter cupboard or water leaking onto the board needs urgent attention. Turn off the main switch and do not touch anything.

Exposed or damaged cable

Bare wires, cuts in insulation or melted plastic

Do not touch it. This is a shock and fire hazard. We can get to Bristol quickly.

Areas of Bristol we cover

We respond to fault calls across Bristol, Southmead and the suburbs, including:

  • Clifton
  • Redland
  • Cotham
  • Bishopston
  • Southville
  • Bedminster
  • Horfield
  • Henleaze
  • Fishponds
  • Knowle
  • Brislington
  • Filton

Other electrical services in Bristol

Questions Bristol customers ask about electrical faults

Can you find a fault over the phone and tell me what it costs to fix?

Often yes. Tell us what the fault is, when it started and what you see happening, and we can usually say whether it is urgent, what might be wrong and roughly how long the fix will take. We always come out to diagnose properly before you commit to paying for the fix.

My electrics keep tripping but I do not know why. Is this dangerous?

Repeated tripping usually means the board is doing its job — detecting a fault and stopping power to protect you. But the fault still needs finding and fixing. It could be a faulty appliance, loose connection or old wiring. We can test everything safely and work out what is causing it.

How long does it take to find and fix a fault?

Many faults take 1–2 hours from start to finish — we find it, fix it and test it. If the fault is intermittent or hidden in buried cable, it may take longer. We will tell you honestly if we cannot fix it in one visit and what a second visit might need.

Do I need to be in when you come to find the fault?

Yes, we need you there to describe the fault and to show us what has happened. Access to the board, the affected room and any cupboards or lofts helps us test properly.

My old fuse box keeps blowing fuses. Can you just replace the fuses?

Sometimes. But repeated blown fuses usually mean there is a fault in the wiring or an appliance is drawing too much current. Replacing the fuses without fixing the problem is not safe. We will test to find the real cause and advise whether the board itself needs replacing.

What if the fault is in my neighbour's part of the building?

In flats and converted houses, the supply and bonding are shared. We work with freeholders and building managers if the fault is in common parts. If the problem is in your neighbour's property, we will advise and help you agree who is responsible for the fix.

Fault with your electrics in Bristol?

Call now for a same-day appointment or diagnosis over the phone.

07123456789